
Plaster itself is rarely the main source of lead in an older home. The lead is usually in the paint, whitewash or base coats applied over it. Those coatings still turn into hazardous dust the moment you sand, scrape or demolish the wall. If your Ottawa house was built before 1990 and you plan to open, patch or strip plaster, test first and plan the work as a containment job. We handle that kind of work, from testing through to clean-up and renovation.
TL;DR
- Lead is mostly found in paint on plaster, not in the plaster itself, though lead can turn up in plasters and putties too.
- Health Canada says homes built before 1960 probably contain lead-based paint, and homes built 1960 to 1990 may have it.
- Intact, undisturbed paint is a low hazard. Sanding, scraping, demolition and dry sweeping are what create the risk.
- Test before any work, keep dust contained, and never put lead debris in the regular garbage.
- Plaster demolition in an older home is best planned as one job: testing, containment, removal and rebuild.
Table of Contents
- Is there lead in plaster?
- Which Ottawa homes are likely to have it
- Why disturbed plaster is the problem
- How to test old plaster in Canada
- Leave it, cover it or remove it
- Why plaster work should not be a weekend job
- Clean-up and disposal
- Our perspective
- What it can cost with us
- FAQ
- Sources
Is there lead in plaster?
In most Canadian homes, the answer is: in what covers the plaster. White lead was the most common white pigment in old paint, and the U.S. National Park Service notes that plaster was often coated with whitewash, calcimine and distemper before titanium dioxide became common at mid-century. Layer after layer of old paint can sit on one wall.
The plaster can matter too. An Australian paint-film monograph cautions that lead may be encountered in plasters, putty and PVC, so the base material should not be ignored when you test. In practice, treat a plaster wall in an older home as a lead-containing surface until a lab result says otherwise.
A British heritage body notes that lead paint was popular until the 1960s, mainly on timber and metalwork, and was also applied to lime plaster in grander buildings. Trim, doors and window casings around your plaster walls are often the most heavily leaded parts of the room.
Which Ottawa homes are likely to have it
Age is the quickest guide. Health Canada’s figures:
| Year built | Likelihood of lead-based paint |
|---|---|
| Before 1960 | Probably contains it |
| 1960 to 1990 | May have it, mostly outside, with smaller interior amounts |
| After 1990 | Should not contain it |
Health Canada’s DIY renovation guide extends the caution to homes built before 1991, which may have lead-based paint or lead base coats under newer paint. Much of Ottawa’s older housing stock, including century homes in the Glebe, Sandy Hill, Vanier and Westboro and postwar houses across the city, falls inside these ranges. Plaster-and-lath walls are common in that era.
A Canadian lab reports that about two-thirds of homes built before 1940 and half of those built 1940 to 1960 contain heavily leaded paint, often on woodwork, doors and windows.
Why disturbed plaster is the problem
Health Canada states that removing, repairing or disturbing lead-based paint can cause lead poisoning, with no known safe level of exposure. Lead affects the brain, nervous system, blood system and kidneys, and the greatest risk is to young children, according to Health Canada’s DIY guidance.
Plaster work produces exactly the dust that carries it:
- Sanding or scraping old painted plaster before repainting.
- Knocking out a plaster wall or ceiling for a new layout.
- Cutting openings for pot lights, vents or pipes.
- Stripping wallpaper that was glued to an old painted surface.
The Canadian Centre for Occupational Health and Safety lists demolition, renovation and remodelling among the highest-risk trades for lead exposure, and names scraping, sanding and heat-gun removal of lead paint as exposing operations. Children and pregnant women should stay out of the house during this work.
How to test old plaster in Canada
Testing turns a guess into a plan. There are three routes:
- Paint-chip sample to an accredited lab. Health Canada says you can send chip samples to a lab or hire a contractor with proper X-ray equipment. The Region of Waterloo’s guide names the Standards Council of Canada and the Canadian Association for Laboratory Accreditation as the bodies that certify labs for lead-in-paint testing.
- On-site X-ray fluorescence (XRF) reading. A technician scans the wall without cutting it.
- Swab kits. Hardware-store kits exist, but plaster can interfere with them. 3M’s guidance says plaster can bind some lead and affect the colour reaction, so a lab result is the safer basis for decisions.
When sampling, Epoch Analytical advises collecting chips of about 2.5 x 2.5 cm down to the original surface, such as plaster. Health Canada defines a lead-containing coating as one over 90 mg/kg.
Reading a lab result
One Ontario lab’s reporting bands give a useful reference: under 89 mg/kg is negligible, 90 to 4,999 mg/kg is typically low risk if the paint is intact, and 5,000 mg/kg or more is classed as lead-based paint needing professional abatement. Our testing and lab analysis is listed at 300 to 600 CAD, and we explain what the numbers mean for your walls. For more on how the 90 mg/kg threshold plays out locally, see our guide to lead paint testing in Ottawa.

Leave it, cover it or remove it
If the plaster paint is intact and out of a child’s reach, Health Canada says lead-based paint is not a health hazard, and removal can create a more immediate one. It suggests encapsulating with vinyl wallpaper, wallboard or panelling and avoiding mechanical removal such as sanding. Our guide to safe lead paint encapsulation covers that option.
The choice depends on what you plan to do:
- Walls staying as they are, paint intact: keep them in good condition and watch for chipping.
- Cosmetic update: cover or encapsulate without disturbing the old layers.
- Opening walls, new layout, a gut renovation, or peeling and flaking plaster paint: removal under containment. Our overview of lead abatement versus renovation helps you weigh it.
Why plaster work should not be a weekend job
Health Canada’s own removal steps show how much it involves: keep children and pregnant women away, use chemical paste strippers rather than sanders, heat guns or blowlamps, seal the room with plastic sheeting and tape over doors and vents, ventilate outward, wear goggles, gloves and a good breathing mask, and work in 10-minute intervals. Whole-wall plaster demolition adds far more dust than paint stripping.
The Australian government’s Lead Alert guide adds that dust-generating methods such as blasting, burning and dry sanding make it very difficult to remove lead contamination from a home completely. Lead can also soak into the timber under the old paint, so trim needs careful handling even after it looks clean.
The Region of Waterloo guide notes that no Canadian law requires contractors to take lead abatement courses and suggests choosing a contractor experienced in asbestos removal, since the working principles are the same. That is the kind of experience to look for when you compare quotes: containment, air quality testing, documentation and clean-up.

Clean-up and disposal
Lead dust does not leave with the debris unless the clean-up is done properly. Health Canada’s guidance for homeowners includes:
- Clean the work area daily and wipe with a damp cloth that you then throw away.
- Use a HEPA-filter vacuum and wet mopping on hard surfaces, and wash work clothes and shoes right away.
- Put scrapings and chips in a sealed container marked “Hazardous Waste” and follow municipal instructions.
- Never burn lead-painted material or pour residue down the drain.
Health Canada explains why: burning releases lead fumes, and landfilled scrapings slowly leach into soil and water. Contact the City of Ottawa about household hazardous waste rules before moving any lead debris. The Region of Waterloo guide also recommends a lead-dust swab before a room is reoccupied; our pages on lead dust cleanup and clearance testing explain this step.
Our perspective
Most of the plaster questions we get start the same way: a homeowner wants to open a wall or redo a ceiling and finds out afterwards that the paint was never tested. By then the dust is already in the house.
We handle licensed and insured abatement, interior and structural demolition, renovation, debris hauling and post-job documentation under one roof. That means the person who tests your plaster is working with the team that will take it down and rebuild the room, and the plan, the permits and the paperwork stay together.
Our quotes are itemized line by line, and we offer estimates within 24 hours. Your lead question gets a clear answer before any demolition starts.
Jason
What it can cost with us
Published ranges for Ottawa-area work that often goes with plaster:
| Service | Price |
|---|---|
| Testing and lab analysis | 300-600 CAD |
| Small Type 1 or 2 abatement jobs | 1500-3500 CAD |
| Single-room strip-out | 1000-4000 CAD |
| Full interior strip-out | 4000-15000 CAD |
| Whole-home or Type 3 abatement | No published price |
Your final cost depends on wall area, access and test results, which is why we quote each line separately.
If you are planning to open plaster walls in an older Ottawa home, we can test, contain, remove and rebuild. See our abatement services or the demolition page to request a free estimate.

If the walls come down as part of a larger project, our renovation services cover kitchens, bathrooms and basements. Our guide to lead-safe renovation in Ottawa walks through the sequence.
FAQ
Is there lead in plaster?
Usually the lead is in the paint, whitewash or base coats on the plaster. Some plasters and putties can contain it as well. Test the wall before disturbing it if your home was built before 1991.
Is intact lead paint on plaster dangerous?
Health Canada says lead-based paint is not a health hazard while it is intact and out of children’s reach. Chipping, peeling, sanding or demolition is what creates the hazard, so plan any such work with containment.
How do I know if my plaster walls have lead?
Send a paint-chip sample, taken down to the plaster, to an accredited lab, or have a contractor with XRF equipment scan the wall. Results above 90 mg/kg count as lead-containing paint under Health Canada’s definition.
Where does lead plaster debris go?
Not in the regular garbage. Seal it in a labelled container and follow the City of Ottawa’s household hazardous waste instructions. Larger renovation debris is handled as part of an abatement project.
Sources
- Lead-based paint, Health Canada
- Chemical safety for DIY projects, Health Canada
- Lead Information Package, Health Canada
- CCOHS: Lead on Construction Projects
- Preservation Brief 28: Painting Historic Interiors, NPS
- Paint film components monograph
- Lead paint, SPAB
- Asbestos, Mold and Lead Abatement Practical Guide, Region of Waterloo
- Lead Alert: The six step guide to painting your home
- Paint on Plaster, Cement, or Stucco Surfaces, 3M LeadCheck
- What is Lead, Epoch Analytical
- Laboratory test for lead in paint, LCS Laboratory
