
White powder on a basement wall is usually one of two things: efflorescence, a mineral salt left behind by water, or mould, a living fungus. Efflorescence is not mould and does not grow, but it proves water is moving through your foundation, and that same moisture is what mould needs. So the useful question is not only “which is it?” but “where is the water coming from?” If the patch is large, keeps coming back or you can’t tell what it is, we can assess it and give you an itemized quote.
TL;DR
- Efflorescence is a dry, white, crystalline or powdery salt on concrete, block or brick. It does not grow, and it is not a fungus.
- Mould is a living organism. It needs moisture and something organic to feed on (wood, paper, drywall, carpet), and it can look downy, fuzzy or powdery in white, grey, green, pink, yellow-orange or black.
- Efflorescence on a basement wall is a sign of ongoing moisture. Fix the water source, or both problems can return.
- If mould covers more than three patches or more than one square metre, or you suspect it inside walls, bring in a trained professional.
- Mould can begin to grow within 48 hours in a damp area, so act quickly after any leak or flood.
Table of Contents
- What efflorescence and white mould actually are
- Efflorescence vs white mould: side by side
- Where each one shows up
- Quick checks you can do from the surface
- Is it a health risk?
- What the white powder says about your basement
- What to do next
- When to get a professional assessment
- Getting it assessed in Ottawa
- Our perspective
- FAQ
- Sources
What efflorescence and white mould actually are
Health Canada describes efflorescence as white powdery salt crystals on walls or masonry, and a sign of excessive moisture. Here is how it forms. Concrete, block and brick contain soluble salts. Water soaks into the wall from the soil, carries those salts toward the interior surface and evaporates. The water leaves, and the salts stay as a white deposit. The Canadian Masonry Health Association says three things must be present: soluble compounds in the masonry, moisture to carry them, and a force such as evaporation or pressure to move the water to the surface.
Mould is different. It is a fungus that grows on materials in buildings, and it needs only moisture and organic material. CAA-Quebec notes that mould develops where there is moisture plus wood, paper or carpet. Bare concrete has nothing for mould to eat. Dust, paint, wood framing, stored cardboard and drywall paper do.
“White mould” is not a single species. It is a description of colour. Several moulds start out white and darken as they mature, which is one reason the two are so often confused.

Efflorescence vs white mould: side by side
No single feature settles it, but a few together usually do.
| What to check | Efflorescence | White mould |
|---|---|---|
| What it is | Mineral salt left by evaporated water | Living fungus |
| Surface it sits on | Bare concrete, block, brick, stone | Often organic material: wood, drywall, paper, carpet, stored items |
| Texture | Crystalline, chalky, powdery or crusty | Downy, fuzzy, furry or powdery |
| Colour | Almost always white, yellow or brown | White, grey, green, pink, yellow-orange, brown or black |
| Rubbed between fingers | Turns to powder | Smears or does not turn to powder |
| Water | Dissolves | Does not dissolve |
| Smell | None | Often musty or earthy |
| Growth | Does not spread or grow | Can spread across a surface |
The finger and water tests come from InterNACHI’s guidance for inspectors: efflorescence turns to powder when pinched and dissolves in water, while mould does not. The same page says efflorescence forms on inorganic materials and mould on organic ones, and that purple, pink or black growth is not efflorescence.
The University of Ottawa’s mould control program lists powdery mineral deposits on concrete after water has evaporated as an indicator of moisture, and also notes that mould-contaminated materials can look greenish-black or grey, but also white, pink or yellowish-orange with a downy or powdery texture. White does not rule mould out.
Where each one shows up
Efflorescence appears directly on foundation walls, concrete floors, block, brick and stone. It tends to form where water has come through the masonry. The CMHA points out that masonry in contact with soil, such as basement walls, can absorb ground water carrying soluble salts, and salts can rise several feet through capillary action. So you often see a band of white along the lower part of a wall, around cracks, or at the joint where wall meets floor.
A K-State Research and Extension agent offers a handy rule of thumb: if the white substance is on anything other than concrete or masonry, it is most likely mould. White fuzz on a wooden stud, the paper face of drywall, a cardboard box or a stored rug is not efflorescence.
Mould shows up on organic surfaces and in damp, poorly ventilated spots: behind stored items, in corners of exterior walls, on the bottom of drywall, on framing and around windows. It can also be hidden. The University of Ottawa program says mould may sit under floors, above ceiling tiles or inside wall cavities, and that musty or earthy odours and occupant symptoms can give it away.

Quick checks you can do from the surface
Treat these as clues, not a lab result.
- Look at what it is growing on. Bare masonry points to efflorescence. Wood, paper, drywall or fabric points to mould.
- Look at the colour range. If you see green, black, pink or orange anywhere nearby, mould is involved.
- Touch it with a gloved finger. Efflorescence crumbles to a dry powder. Mould smears or feels soft or fuzzy.
- Dab it with a little water. Efflorescence dissolves. Mould does not.
- Smell the area. Efflorescence has no odour. A musty, earthy smell suggests mould, possibly out of sight.
- Check back in a few days. Efflorescence that you brush away and see return means water is still moving through the wall. Mould tends to spread and darken.
Wear gloves, an N95-rated mask and protective glasses if you handle anything you suspect could be mould, which is the protective gear CMHC recommends even for small cleanups. Do not dry-brush or sweep a suspected mould patch, since that sends spores into the air.
Is it a health risk?
Efflorescence itself is a mineral deposit, not a living organism, and the CMHA says that although it can be an aesthetic concern, it will not affect structural performance.
Mould is the health question. Health Canada says exposure may cause eye, nose and throat irritation, coughing, wheezing, shortness of breath and worsened asthma. How much it matters depends on how much mould there is, how long it has been there and who lives in the home. Ottawa Public Health says infants, children, older adults and people with breathing difficulties are more at risk, and that respiratory concerns should be discussed with a physician. If anyone in your household has asthma, new breathing symptoms or a weakened immune system, speak to your doctor and treat suspected mould seriously.
What the white powder says about your basement
Even when it is only efflorescence, it is a message. CMHC’s About Your House guide explains that efflorescence indicates moisture has wicked through the foundation wall, and that continued efflorescence signals an ongoing moisture problem. Its recommended fixes are better exterior drainage and damp-proofing.
CMHC’s Moisture and Air guide lists white powdery stains on concrete walls or floors among the signs of basement moisture trouble, and names likely causes: leaks through cracks, a high water table, grading that slopes toward the house, blocked footing drains, unvented dryers and items stored against cold walls.
For older Ottawa homes, that list is familiar. Aging foundations crack, original drain tile clogs, and grading shifts over decades. In a spring thaw or after heavy rain, a wall that stayed dry for years can start weeping. Because water is also what mould needs, an inspector’s report will often note efflorescence even though the deposit is harmless, as InterNACHI explains: it marks excess moisture, which encourages mould.
That is why scrubbing off the powder is not a fix. Health Canada is direct on this point: mould will reappear unless the cause of the moisture is identified and solved.
What to do next
If it looks like efflorescence
Keep an eye on the area and look for the water path: a crack, a downspout that empties beside the wall, soil sloping toward the house, a window well that collects water. Moisture control indoors matters too. Health Canada’s guidance, in its French-language version, recommends keeping indoor relative humidity between 30% and 50%, using a dehumidifier if needed, and sloping the ground away from the house. CMHC adds that a damp basement, especially a heated one, can generate more moisture than all other sources in the house combined. A simple way to track humidity is monitoring humidity with a hygrometer, which is especially handy for a vacant or rarely visited property.
If you plan to finish the basement, address the moisture first. Our guide to mould-resistant renovation materials and our basement mould prevention guide for Ottawa homes cover what holds up in a damp-prone space.
If it might be mould
Speed matters. Ottawa Public Health says mould can grow within 48 hours and can grow behind walls, so a response within 24 to 48 hours, with cleanup, drying and removal of water-damaged materials, limits growth.
CMHC’s rule for size is simple. A small area, meaning fewer than three patches, each under one square metre, can be cleaned with unscented detergent and water while wearing rubber gloves, an N95 mask and protective glasses, then rinsed and dried quickly. More than three patches or anything over one square metre should be assessed by a trained mould remediation professional. Mouldy carpet and ceiling tiles should be removed and discarded.
Our article on why large areas call for remediation rather than simple removal explains what that difference means in practice.
When to get a professional assessment
Health Canada advises consulting a professional when earlier efforts have not solved a moisture or mould problem (including persistent symptoms), when hidden mould is suspected inside walls or above ceilings, or when flooding has soaked wall or floor cavities that cannot be dried by conventional methods.
In plain terms, call someone when:
- you can’t tell what the white material is and it is on drywall, wood or other organic material;
- there is a musty smell but no visible source;
- the area is larger than one square metre or has more than three patches;
- a flood or leak has reached behind finished walls;
- the patches come back after cleaning;
- someone in the home has symptoms that seem tied to the basement.
If you want to understand when lab sampling is worth it, our guide on Health Canada’s view on mould testing walks through it. After remediation, a mould clearance test confirms the work was done properly. If you are wondering about coverage for water damage, see when home insurance covers mould.
Getting it assessed in Ottawa
HMJ Contracting is a licensed and insured contractor offering mould remediation in Ottawa, including air quality testing, and our published price ranges are: testing and lab analysis at $300 to $600 CAD, a small contained area at $500 to $1,500 CAD, and a single room or bathroom at $2,000 to $6,000 CAD. Basement or flood-related jobs are quoted individually. Our quotes are itemized line by line, we provide estimates within 24 hours, and we hold a 5.0-star Google rating. Because we also handle demolition and renovation, a wall that has to be opened, dried and rebuilt stays with one team.

If you also find suspect material in an older home, such as vermiculite insulation or old textured finishes, our abatement services cover testing and certified removal. You can reach us through hmjcontracting.com.
Our perspective
Most homeowners who call us about white powder on a basement wall are asking the wrong question first. They ask “is it mould?” The better question is “why is this wall wet?”
After more than 25 years working on Ottawa homes, we know that older foundations, original drain tile and shifting grade all show up eventually as moisture on the inside. Efflorescence is the wall telling you that. Mould is what can follow when that moisture meets drywall, framing or stored boxes.
That is why we like to look at the whole picture: the surface, the moisture path and what is behind the finish. Our work covers abatement, mould remediation, demolition and renovation, so if materials have to come out, the area gets dried and rebuilt without handing the job between several companies. We document the work and quote it line by line, so you know what each part costs before it starts.
If you are unsure what you are looking at, an assessment is a small step compared with finishing a basement over a hidden problem.
Jason
FAQ
Is white powder on a basement wall always efflorescence?
No. On bare concrete or block it is most often efflorescence, but some moulds are white and powdery too. If the material is on wood, drywall or stored items, or if it smells musty, treat it as possible mould. A professional can confirm what it is.
Can efflorescence turn into mould?
Efflorescence is a mineral salt and does not turn into anything living. The moisture that causes it, though, can support mould on nearby organic materials. That is why CMHC treats continued efflorescence as a sign of ongoing moisture problems.
Does efflorescence mean my foundation is failing?
Not by itself. The CMHA says it does not affect structural performance. It does mean water is passing through the wall, so have the drainage, grading and cracks looked at before the moisture causes bigger problems.
How quickly can mould appear after a leak?
Health Canada says mould can begin to grow within 48 hours in an area with excessive moisture. Dry the area as fast as you can and remove water-damaged materials that cannot be dried.
Should I be worried about my family’s health?
It depends on how much mould there is and who lives in the home. Infants, children, older adults and people with asthma or other breathing conditions are more at risk, according to Ottawa Public Health. Talk to your doctor about any symptoms.
Sources
- Health Canada: Guide to addressing moisture and mould indoors
- Health Canada: guide to addressing moisture and mould (French version)
- University of Ottawa: Mould Control and Water Damage Restoration Program
- CAA-Quebec: Signs of water infiltration in the basement
- K-State Research and Extension: efflorescence news column
- InterNACHI: Efflorescence for Inspectors
- CMHA: Control and Removal of Efflorescence
- CMHC: About Your House (NH18-24-28c, 2008)
- CMHC: Moisture and Air guide
- Ottawa Public Health: Mould
- Monitoring humidity with a hygrometer
